MPOA

DC Blocker and Mains Power Optimizer for Audio Equipment

 199,50 VAT included

You may also like…

  • BVA01-Z0000-10

    BVA01-Z0000-10

    Connector for AC supply 10A 250VAC IEC 60320 UL94V-0

     14,93 VAT included
SKU AP-MPOA Categories ,

Manufacturer : Audio products

Fully assembled board including wired terminal plate with terminals and mains switch with fuse.

DC blocking in the AC mains power, EMI suppression and over voltage protection in one circuit.

The Audio products MPOA largely reduces the DC part in the AC line and in addition suppresses EMI with a powerful mains filter circuit and also adds an over voltage protection circuit to the mix.

Do NOT underestimate the influence of the mains power on the performance of your audio equipment. A problem well known to affect the performance of audio equipment is DC on the mains, especially power amplifiers with large torroidal transformers are sensitive to these DC levels.

In theory the mains electricity we obtain from the sockets in our homes should be pure AC with a perfectly symmetrical sine wave alternating between positive and negative phases. However, the presence of asymmetrical loads like household devices that use the AC energy available in the mains cycle unevenly, from dimmer switches to kitchen appliances, hair dryers, computer power supplies and even car chargers causes the waveform to become offset, resulting in the presence of DC voltage on the AC supply. This DC voltage often result in humming power transformers.

The EMI filter scrubs most of the rubbish put in the mains by power line network extenders, smart power meters and signal used by your utility provider to control smart equipment on the power grid like street light ect.

The over-voltage protection trips on voltage spikes above 270VAC to actively protect your expensive equipment from damage.

Specifications

Mains voltage : 230VAC
Power handling : 2500W or 14A continuous (3500W repetitive peak)
EMI filter choke : 4 mH, Cu 1.8, 14A
Over voltage protection at : 270 VAC
Faston terminal connectors for rigid connections of wires
Capacitor bank : 65400 uF
Ultra fast diodes each on individual heat sinks
PCB dimensions : L150 x W135 x H45 mm

PLEASE NOTE THAT ALL PARTS OF THIS CIRCUIT ARE DIRECTLY CONNECTED TO THE MAINS VOLTAGE SO TAKE CARE WHEN HANDLING!

Weight 1 kg
User manual

https://diy-hifi.com/wp-content/uploads/2022/03/MPOA.pdf

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top